Cold Weather Job Site Safety: A 10-Step Checklist for Temporary Traffic Control Crews

Cold Weather Job Site Safety: A 10-Step Checklist for Temporary Traffic Control Crews

As winter creeps closer, traffic control crews continue to lose evening light. Add in Daylight Savings Time pushing clocks forward an hour each November, and the changes become much more dramatic.

For flaggers, this seasonal shift is more than a scheduling adjustment. It’s a safety problem. More than half of all fatal work zone crashes in 2024 happened at night, according to a fact sheet from the Federal Highway Administration. Work zone crashes killed 850 people that year, an average of at least two people every day.

It’s not just the darkness that endangers flaggers. The weather itself can be a devastating hazard. Wind and wet clothing pull heat from the body fast. The Occupational Safety and Health Administration notes that trench foot can develop at temperatures as high as 60 degrees if feet stay wet, because wet feet lose heat 25 times faster than dry ones.

Below is a look at why temporary traffic control (TTC) crews face extra risk in the colder, darker months, a 10-step checklist you can run through at your next tailgate meeting, and a quick guide to spotting cold stress before it turns into an emergency.

Why Are TTC Crews at Greater Risk in Cold, Dark Weather?

Temporary traffic control crews are uniquely vulnerable to the elements. Flaggers stand in one spot for long stretches, take a blast of wind from every passing truck, and often work through the darkest, coldest hours of the day.

Wind does more damage than most people expect. OSHA’s cold stress guidance gives a simple example: an air temperature of 40 degrees with a 35 mph wind produces a wind chill of 28 degrees. Add a steady drizzle, and a mild fall evening becomes a real hazard.

Drivers are dealing with the same weather. About 12% of all vehicle crashes, nearly 745,000 a year, are weather-related, based on 2019 to 2023 averages reported by the FHWA Road Weather Management Program. Snowy or slushy pavement cuts speeds on arterial roads by 30% to 40%, a sign of how hard drivers are working to keep control. That puts two hazards on the same stretch of road: a crew losing body heat and drivers losing traction and visibility.

OSHA has no specific cold weather standard, but employers must still protect workers from recognized hazards like cold stress under the General Duty Clause of the Occupational Safety and Health Act. Managing cold weather work zone safety means preparing for both.

The 10-Step Work Zone Safety Checklist

Use this checklist to make sure your crew is ready to stay safe on TTC duty:

  1. Check the forecast before every shift. Pay close attention to wind chill, since it speeds up heat loss and raises the risk of frostbite. Adjust break schedules, crew sizes, and start times as needed. When the job allows, OSHA recommends scheduling work during the warmest part of the day.
  2. Layer up without covering high-visibility gear. Workers should wear high-visibility vests over their winter coats or use high-visibility winter outerwear. A bulky coat zipped over a vest defeats the purpose. Flagging operations must follow the high-visibility apparel requirements in the current Manual on Uniform Traffic Control Devices.
  3. Plan for early darkness. Inspect lighting at flagger stations and work areas before the shift starts. Don’t wait until sunset to discover a dead battery or a failed light tower that leaves your crew standing in the dark.
  4. Clear and secure your devices. Snow, ice, and road spray quickly cover warning signs and reflective sheeting, making them useless. High winter winds can easily tip cones and drums, so make sure everything is properly ballasted.
  5. Give drivers more warning on slick roads. Drivers need significantly more stopping distance in snow and ice. Review sign spacing against your approved TTC plan and adjust for slick or icy conditions.
  6. Schedule warm-up breaks. Make sure every site has a warm, dry space, protected space, like a running truck cab or a heated trailer. OSHA recommends frequent short breaks in warm, dry areas, plus warm, sweet drinks. Breaks matter even more for flaggers, who can’t move around to generate body heat.
  7. Use the buddy system. Cold stress is hard to recognize in yourself, partly because confusion is one of the symptoms. Train your team to watch for early signs of cold exposure in their coworkers, and pair workers so no one goes unchecked.
  8. Protect hands and feet. Supply insulated, waterproof gloves that still allow a firm grip on a paddle or two-way radio. Keep extra waterproof boots and dry socks in the truck. Wet socks are how trench foot starts.
  9. Know the warning signs and what to do. Uncontrollable shivering is an early sign of hypothermia. Confusion, slurred speech, and loss of coordination mean it’s getting worse. Call 911 and move the worker to a warm vehicle or room right away. The next section breaks down the signs in more detail.
  10. Brief every new or temporary worker before they go on-site. Make sure all new hires and temporary workers know the TTC plan, escape routes, communication signals, and your cold weather rules. OSHA advises keeping a closer eye on new workers who aren’t used to the cold and on workers returning after time away.

How Do You Spot Cold Stress Before It Becomes an Emergency?

Shivering, numbness, and confusion don’t all point to the same problem. Here’s what to watch for, based on OSHA’s cold stress guidance.

Hypothermia

Hypothermia sets in when body temperature drops below 95 degrees.

  • Signs: Uncontrollable shivering comes first. Later signs include loss of coordination, confusion, slurred speech, and slowed heart rate and breathing.
  • What to do: Call 911. Move the worker to a warm room or vehicle, replace wet clothing with dry clothing, and wrap the body, including the head and neck, in blankets while leaving the face uncovered. If the worker is alert, offer warm, sweet drinks.

Frostbite

  • Signs: Reddened skin that turns gray or white on the fingers, toes, nose, or ear lobes, along with tingling, aching, loss of feeling, or firm, hard skin.
  • What to do: Get the worker somewhere warm and loosely wrap the area in a dry cloth. Don’t rub it, and don’t try to rewarm it with heating pads or warm water before medical help arrives.

Trench Foot

  • Signs: Redness, numbness, tingling, swelling, leg cramps, or blisters after long hours in wet, cold boots. It doesn’t take freezing temperatures.
  • What to do: Remove wet boots and socks, dry the feet, keep them elevated, and get medical help as soon as possible.

What Does a Cold Weather Shift Look Like in Practice?

Picture a utility crew setting up a lane closure on a damp November afternoon. Rain started at noon, and by 5 p.m. it’s dark and the temperature is sliding into the low 40s. One flagger’s boots have soaked through. He hasn’t said anything, but his partner notices him fumbling the radio and missing a hand signal.

With the checklist in place, that moment doesn’t become an incident. The partner calls it in, a relief flagger steps in, and the soaked worker spends 15 minutes in the running truck with dry socks from the spare kit. The lights were checked at 3 p.m., so the station stays lit. Every step on the list did its job.

Winter-Ready Crews Start Before Day One

This checklist works only if every worker on your site knows it, including recent hires and people brought in for a single job. When you need temporary workers, look for a staffing partner that understands cold weather hazards and can provide a trained, safety-conscious workforce.

HireQuest Direct offices regularly staff flaggers and TTC workers for a variety of projects, including construction, roadwork, and special events. To learn more, contact a HireQuest Direct office near you before your first big winter project.

Frequently Asked Questions

Can HireQuest Direct Staff Flaggers and TTC Workers for Winter Projects?

Generally yes, HireQuest Direct can staff flaggers and temporary traffic control workers for winter road, utility, and construction projects. As a nationwide staffing provider, we are compliant with local regulations that restrict some jobs during certain calendar periods.

How Quickly Can HireQuest Direct Fill a Winter Work Zone Order?

HireQuest Direct fills work orders as soon as possible, often within 24 hours. That speed matters in winter, when weather delays and emergency repairs can change your crew needs overnight. Locally owned offices handle on-demand requests, so you can add flaggers when a job opens up.

Does HireQuest Direct provide certified flaggers?

Absolutely. In fact, many HireQuest Direct temporary staffing offices host regular flagger certification training courses in-house to ensure our clients receive the most qualified, safety-conscious employees possible for all their traffic control needs.

Can HireQuest Direct Staff Winter Road Projects Across Multiple Sites?

Yes, HireQuest Direct can staff winter road projects across multiple sites through its National Accounts program. With our dedicated NA team, our clients receive a single point of contact, a dedicated account manager, and consolidated invoicing, while local teams fill the orders.

Recent Posts

Explore all Insights
Work Today, Get Paid Today: How Daily Pay Works for Temporary Jobs

Work Today, Get Paid Today: How Daily Pay Works for Temporary Jobs

You found work. That’s the good news. The hard part is the wait. At most jobs, your first check shows up one or two weeks af...
Read More
Nov 10, 2026
8 Safety Questions to Ask Your Staffing Partner Before Day One

8 Safety Questions to Ask Your Staffing Partner Before Day One

A new temp worker walks onto your floor at 7 a.m. Within the hour, they’re running your equipment next to your most trusted...
Read More
Nov 5, 2026
Bidding a Data Center Job? Plan Your General Labor Before You Price It | 7 Hot Spot States

Bidding a Data Center Job? Plan Your General Labor Before You Price It | 7 Hot Spot States

Most data center bids get the skilled trades right. Electricians, mechanical crews, and systems specialists are priced down to the...
Read More
Nov 3, 2026
Explore all Insights